Quick Installation Guide 4 Channel H.
Q-SEE QUICK INSTALLATION GUIDE MODEL NUMBER QSDR744KRTS PART 1 - PACKAGE CONTENTS: QSDR74RTS DVR Power Supply For DVR Software CD 4 Cameras with Stands (2) QD28414 Cameras (6mm Lens) (2) QD28414W Cameras (3.6mm Lens) Power Supply & 4 -Way Splitter For Cameras Ethernet Cable 1|Page Pre-Installed Hard Drive User’s Manual Camera Cables (4 Included) BNC (M) – RCA (F) Adapter USB 2.
Q-SEE QUICK INSTALLATION GUIDE MODEL NUMBER QSDR744KRTS PART 2 - DVR CAMERA AND POWER CONNECTIONS (Figure 1) 1. Connect one end of the 60 Ft. extension cables to the cables that are connected to the cameras. 2. Connect the other end of the 60 Ft. extension cable to the DVR as illustrated in Figure 1. 3. Following the illustration in Figure 1, plug the power connecter of the 60 Ft. extension cable to the 4 way splitter. Repeat steps 1 through 3 for each camera. 4.
Q-SEE QUICK INSTALLATION GUIDE MODEL NUMBER QSDR744KRTS PART 3 - DVR CONTROLS: FRONT PANEL 1. 2. 3. 4. 5. 6. 7. Enter/Exit Display Screen Display Screen for Menu Show Menu Scroll Down in Menu Scroll Up in Menu Numeric Keys and Channel Select View All Channels 8. Menu/Escape/Left 9. Enter or Exit PTZ 10. Up Button 11. Power LED 12. IR Receiver 13. Hard Drive LED 14. Down Button 15. Select/Edit/Right 16. Reverse/PTZ Focus 17. Pause/Auto Sequence 18. Play 19. Forward 20. Stop Recording 21.
Q-SEE QUICK INSTALLATION GUIDE MODEL NUMBER QSDR744KRTS PART 5 - SETTING UP CAMERAS FOR VIEWING AND RECORDING From the Main menu, select CAMERA. Here you can setup the name display (up to 8 characters) and position of each channel (cameras). Select COLOR SETUP to adjust the image brightness, saturation, contrast and hue settings for each channel (camera). You can also choose whether each channel can be previewed in LIVE MODE and/or RECORDING MODE.
Q-SEE QUICK INSTALLATION GUIDE MODEL NUMBER QSDR744KRTS Grid Explanation: Red = Alarm (motion detection) recording Green = General (time schedule) recording Transparent = No recording Blue = The channel and date selected. Manual Recording: From the Record Setup screen set the Rec Mode to “ALWAYS”. Your DVR will continuously record and separate files will be created with the Pack Time intervals you selected.
Q-SEE QUICK INSTALLATION GUIDE MODEL NUMBER QSDR744KRTS The Motion detection Menu has three sections, including Channel Status, Sensitivity and Motion area. STATUS: This option allows you enable motion detection on any channel. SENSITIVITY: This option allows you to set sensitivity level of motion detection from 1 to 4, with 4 being the highest. Next, click on the MD AREA SETUP button, which will display the picture on the left. This option allows you to select the area you want to be sensitive to motion.
Q-SEE QUICK INSTALLATION GUIDE MODEL NUMBER QSDR744KRTS File List: On the Video search menu mode, click File list to display the sub-menu shown in the picture on the left. This option will allow you to view all of the available files by channel and type (all, normal, or alarm). You can select a file and push the SEL button to playback the file, or use the FWD button and down button to select the backup option and backup the recorded file you selected.
Q-SEE QUICK INSTALLATION GUIDE MODEL NUMBER QSDR744KRTS Questions or Comments? Contact Us: Mailing Address: Customer Service: DPS, Inc. 8015 E. Crystal Dr. Anaheim, CA 92807 Phone: 877-998-3440 x 538 Email: cs@dpsi-usa.com Live Chat from our Website Website: Tech Support: http://www.q-see.com Fax: 714-998-3509 Phone: 877-998-3440 x 539 Email: ts@dpsi-usa.
