4 Channel H.264 DVR Model: QSD9004CM What’s in the box? check that your package includes the following: PWR HDD CH1 CH2 CH3 CH4 QUAD PTZ 4 Channel Digital Video Recorder REW PAUSE PLAY FWD STOP REC Software CD 4 Channel DVR Manual USB Mouse Ethernet Cable Power Supply for DVR Remote Control 60 FT. Cables x 4 Power Supply and 4 Way Splitter for Cameras Digital Peripheral Solutions, Inc. 8015 East Crystal Drive, Anaheim, CA 92807 www.Q-See.
1 Connect 1 CONNECT 4 Channel DVR FRONT VIEW 2 1 3 14 A B C D E 13 PWR HDD CH1 CH2 CH3 CH4 QUAD 1 PTZ 4 Channel Digital Video Recorder REW PAUSE 4 5 PLAY FWD 6 STOP 7 REC 8 Connect the 60 ft. extension cable to the camera Connect the female power end of the 60 ft.
2 Setup To navigate through the DVR menu, three options are available: C Setting up the DVR to Record: 1. DVR Front Panel: Use the DIRECTION keys to move the cursor and the SEL key to select 2. Remote Control 3. USB Mouse (included) This system offers three modes for recording: 1. Manual 2. Time Schedule 3. Motion Detection C1 A Accessing the DVR menus Push MENU from the DVR front panel, or remote.
Motion Detection Recording: From the Record Setup screen, set the Rec Mode to “TIME SCHEDULE RECORD” and click “SCHEDULE” in green. This will display the Schedule menu (C2). The options are: All, CH-1, CH-2, CH-3, and CH-4 respectively. The channel you select will be highlighted in “Blue”, and the unselected channels will be Grey. Click on the red ALARM option box, and then click on the boxes for the days and times that you want to record using this option on the timeline.
C6 Click on the MD AREA SETUP button, to display the image shown in (C6). This option allows you to select the area you want to be sensitive to motion. The area in red is sensitive to motion. You can set this area by using the USB mouse, or pushing the REV, FWD, and SEL keys on the DVR front panel. Once you have set the area, right click with the mouse or push the ESC key to save the setting. After you have set the motion sensitivity area for all cameras, click on the Apply button to save the settings.
3 Enjoy CONGRATULATIONS on your purchase! This Q-See product has undergone extensive quality control. If you have any issues during the setup process, please contact our support department before returning the product. We have your solution! 1) Need assistance setting up the remote monitoring feature with your Q-See DVR? Visit www.portforward.com/qsee 2) Visit our Q-See Support Section at www. Q-See.com for instant troubleshooting tips, FAQs, DVR firmware downloads, Live Chat and More.
