User guide

Open Problem Reports and Feature Exceptions
OmniSwitch 6600/7000/8800—Release 5.1.6.R02 page 89
PR 80757
Only a single client on a given port for a given multicast group is shown in the group membership,
displays on an OS6600/OS7000 switch.
Workaround: This is a result of the way IGMP clients respond to group membership queries. Only a
single client will respond in a flooded environment where all clients will see the report. If a client receives
a group membership report for the same group on its interface, it will not send its own membership report
as a result.
OSPF
Problem Reports
PR 55287
It is currently not possible to change the key-id for md5 authentication over OSPF virtual links on an
OS7000 series switch. It will always be 1.
Workaround: Please make sure that the adjacent router on the virtual link has the key-id configured also.
PR 56345
One cannot unload and reload OSPF on an OS7000 series switch.
Workaround: There is no known workaround at this time.
PR 58676
The OSPF default cost is the same for fast Ethernet and the gigabit interface on an OS7700/7800 switch.
Workaround: There is no known workaround at this time.
PR 65617
OSPF stops advertising static routes to the network when the route tag is configured on a redistribution
filter on an OS7000 series switch.
Workaround: There is no known workaround at this time.