User guide

Open Problem Reports and Feature Exceptions
OmniSwitch 6600/7000/8800—Release 5.1.6.R02 page 57
PR 68515
Performance of port mirroring is around 3000 packets/second after a hot swap on an OmniSwitch 8800
switch.
Workaround: There is no known workaround at this time.
PR 71793
Port mirroring is not at wire rate. The mirrored port will drop traffic when port mirroring is enabled on an
OS7000 series switch.
Workaround: There is no known workaround at this time.
PR 72891
On an OS7000 series switch, the egress port mirroring rate is less than 1GBPS for the OS7-GNI-C12
modules when the link speed is 1G.
Workaround: There is no known workaround at this time.
PR 77036
There is high performance degradation for port mirroring on an OS8-GNI-C8.
Workaround: There is no known workaround at this time.
PR 78852
There is some performance degradation from 1488095pkts/s to 975134pkts/sec on an OS8-GNI-U24.
Workaround: There is no known workaround at this time.
PR 79329
There is some performance degradation on egress (outport) port mirroring (from 1,488,095 p/s to
1,333,624 p/s) on an OS8-GNI-U24.
Workaround: There is no known workaround at this time.
PR 80242
Unable to modify the in/out port mirroring session using the default port mirroring command on an
OS7000 series switch. Direction of mirroring takes previous value when the modify command is entered.
Workaround: Specify the direction explicitly in the modify command.