User guide

Open Problem Reports and Feature Exceptions
page 40 OmniSwitch 6600/7000/8800—Release 5.1.6.R02
PR 83829
Whenever you access a WebView page through the browser history list after logging in an OS7000 series
switch, the page accessed will display without the usual control frames.
Workaround: Refrain from using the history list. ("Site Map" page is available from each home page
containing direct links to table and configuration pages.)
PR 84031
WebView's "Reload On" function for an OS6600 series switch does not function according to specifica-
tion.
Workaround: There is no known workaround at this time.
PR 84243
The firmware revision cannot be viewed in Webview under Chassis Management.
Workaround: There is no known workaround at this time.
PR 84255
When doing multiple modifications on an OS7000 series switch, such as Layer 2 > Vlan Mgmt > VLAN
Configuration > Ports > Port Association > Move Ports, only the first 64 ports of the entire selection is
associated. A WebView dialog box comes up indicating that only the first 64 is applied with the choice of
proceeding or cancelling.
Workaround: There is a design limitation which allows only 64 entries to be modified at a time.
PR 84270
WebView’s UDP Relay Association page only allows a maximum of (3) entries on an OS7000 series
switch.
Workaround: All services are displayed via CLI.
PR 84281
WebView's Sort button may disappear on longer pages.
Workaround: There is no known workaround at this time.
PR 84616
When changing spanning tree bridge modes using CLI, while the WebView Spanning Tree menu has
already loaded, the menu might not correspond to the correct mode, even though refreshing the home page
displays the correct mode.
Workaround: Click on the Spanning Tree icon located on the Outlook-like bar to the left of the screen.