User guide

Open Problem Reports and Feature Exceptions
page 30 OmniSwitch 6600/7000/8800—Release 5.1.6.R02
PR 91912
While configuring an OSPF interface with the ?ip ospf interface? command, spaces cannot be used in the
interface name. For example, entering the ?ip ospf interface vlan-101? command is valid, but entering
the ?ip ospf interface vlan 101? command is not.
Workaround: Do not use spaces in the OSPF interface name.
PR 92286
Command prompt may disappear after attempting the "show" command not allowed for users.
Workaround: Type exit and then login again.The prompt will come back.
RMON
Problem Reports
PR 55770
Duration and System Resources for RMON are not accessible via SNMP or WebView on an OS7000
series switch.
Workaround: The RMON subsystem only shows the values for these objects using CLI.
PR 87876
If rows are rapidly added/deleted on the RMON history table, the switch may reload.
Workaround: There is no known workaround at this time.
SNMP
Problem Reports
PR 43837
Each time an SNMP v3 Manager "discovers" a new switch, the switch SNMP agent reports a "time stamp
error" when answering the first v3 request on an OS7000 series switch.
Workaround: There is no known workaround at this time.