Specifications

26 SMS 7000 Release Notes

Version 6.41

Install the MCPU(s). The FLASH ROMs have been preloaded with MCPU

application software. After installing the ROMS, the MCPU application

runs, but peripheral devices such as panels, coprocessors, and node con-

trollers will not come on-line and not function properly until the following

steps are completed:

■ New NC application software is programmed into the NC FLASH

■ New Panel Application software is loaded into all panels and properly

conﬁgured

■ A conﬁguration is sent to the system from the PC GUI

CAUTION

After updating the MCPU to 6.41, the module may appear to communicate

properly with Node Controllers and CP Bus Devices. However, until the Node

Controllers and CP Bus Devices are updated, the system will not function re-

liably.

MCPU FLASH SIMMs (J1, J2)

(Ver. 3 & 4 systems only)

2 160135-00 MCPU/062876-xx

MCPU 80960CF (SU8)

MicroProcessor (E0 STEP)

(Ver. 3, 4, & 5 systems only)

1 SC2813-00 MCPU/062876-xx

Table 14. New MCPU Firmware and Hardware

Description

Quantity

per

Board

New

Firmware,

Hardware

Part Number

Board(s)/ Part Number