user manual

7 – Zoning Configuration
Managing Zone Sets
59183-01 A 7-13
A
7.6
Managing Zone Sets
Managing Zone Sets consists of the following tasks:
 Create a Zone Set
 Delete a Zone Set
 Rename a Zone Set
 Copy a Zone Set
 Add Zones to a Zone Set
 Remove Zones from a Zone Set
 Activate a Zone Set
 Deactivate a Zone Set
All of these tasks except Activate a Zone Set and Deactivate a Zone Set require
an Admin session and a Zoning Edit session.
7.6.1
Create a Zone Set
Enter the Zoneset Create command to create a new zone set as shown in the
following example:
SANbox #> admin start
SANbox (admin) #> zoning edit
SANbox (admin-zoning) #> zoneset create zoneset_1
SANbox (admin-zoning) #>zoning save
7.6.2
Delete a Zone Set
Enter the Zoneset Delete command to delete a zone set as shown in the following
example:
SANbox #> admin start
SANbox (admin) #> zoning edit
SANbox (admin-zoning) #> zoneset delete zoneset_1
SANbox (admin-zoning) #>zoning save