user manual

13 – Command Reference
Reset
59183-01 A 13-51
A
Enter the Show Setup System command to display system configuration
values.
Enter the Show Config Security command to display security configuration
values.
Table 13-12. System Configuration Defaults
Parameter Default
Ethernet Network Enable True
Ethernet Network Discovery Static
Ethernet Network IP Address 10.0.0.1
Ethernet Network IP Mask 255.0.0.0
Ethernet Gateway Address 10.0.0.254
Admin Timeout 30 minutes
InactivityTimeout 0
LocalLogEnabled True
RemotelogEnabled False
RemoteLogHostAddress 10.0.0.254
NTPClientEnabled False
NTPServerAddress 10.0.0.254
EmbeddedGUIEnabled True
Table 13-13. Security Configuration Defaults
Parameter Default
AutoSave True
FabricBindingEnabled False
PortBindingEnabled False