user manual

13 – Command Reference
Reset
13-44 59183-01 A
S
factory
Resets switch configuration, port configuration, port threshold alarm configuration,
zoning configuration, SNMP configuration, system configuration, security
configuration, RADIUS configuration, switch services configuration, and zoning to
the factory default values as described in Table 13-5 through Table 13-13. The
switch configuration is activated automatically.
port [port_list]
Reinitializes one or more ports given by [port_list]. [port_list] can be a set of port
numbers and ranges delimited by spaces. For example, [0 2 10-15] specifies ports
0, 2, 10, 11, 12, 13, 14, and 15.
radius
Resets the RADIUS configuration to the default values as described in
Table 13-10.
security
Clears the security database and deactivates the active security set. The security
configuration value, autosave, and fabric binding remain unchanged.
services
Resets the switch services configuration to the default values as described in
Table 13-11.
snmp
Resets the SNMP configuration settings to the factory default values. Refer to
Table 13-9 for SNMP configuration default values.
NOTE:  Because this keyword changes network parameters, the
workstation could lose communication with the switch and
release the Admin session.
 This keyword does not affect installed license keys.