user manual

11 – Event Log Configuration
Displaying the Event Log
59183-01 A 11-3
A
11.2.1
Filtering the Event Log Display
You can customize what events are displayed according to the component or
severity level. Enter the Show Log Display command to filter the events in the
display. You can choose from the following severity levels and component events:
 Informative events
 Warning events
 Critical events
 E_Port events
 Management server events
 Name server events
 Port events
 Switch management events
 Simple Network Management Protocol (SNMP) events
 Zoning events
The following example filters the event log display for critical events.
SANbox #> show log display critical
11.2.2
Controlling Messages in the Output Stream
Enter the Set Log Display command to specify the severity level filter to use to
determine what messages are automatically displayed on the screen when they
occur. Alarms are always included in the output stream. The following example
includes warning and critical level messages in the output stream:
SANbox (admin) #> set log display warn