user manual

59183-01 A 1-1
Section 1
Introduction
This guide describes the features and use of the command line interface for
SANbox 5000 Series switches running firmware version 6.7. This guide is
organized as follows:
 Section 1 describes switch models and features, the intended audience,
related materials, new items in this release, and technical support.
 Section 2 describes logging on and off of a switch, opening and closing an
Admin session, entering commands, getting help, paging a switch, setting
page breaks, and loading and retrieving files.
 Section 3 describes the management of user accounts and passwords.
 Section 4 describes configuring the switch network connection.
 Section 5 describes managing the switch configuration, setting the date and
time, backing up and restoring the switch configuration, resetting the switch,
installing firmware, and installing feature licenses.
 Section 6 describes port configurations, resetting a port, initializing a port
loop, configuring port threshold alarms, and testing ports.
 Section 7 describes managing the zoning database and configuring
interoperability.
 Section 8 describes managing connection security.
 Section 9 describes managing device security.
 Section 10 describes managing the Remote Authentication Dial-In User
Service (RADIUS) server.
 Section 11 describes events and event logging.
 Section 12 describes managing the Simple Network Management Protocol
(SNMP) configuration.
 Section 13 lists the commands in alphabetical order, including the command
syntax, keywords, notes, and examples.
An index and a glossary are also provided.