user manual
Table Of Contents
- Table of Contents
- 1 Introduction
- 2 Command Usage
- 3 Configuring CHAP
- 4 Command Reference
- Command Listing
- Command Syntax
- Admin
- Beacon
- Clear
- Date
- FcipRoute
- FRU
- Help
- History
- Image
- Initiator
- Localmap
- Logout
- Password
- Ping
- Quit
- Reboot
- Remote Map
- Remote Peer
- Reset Factory
- Save
- Set
- Set CHAP
- Set FC
- Set Features
- Set iSCSI
- Set iSNS
- Set Mgmt
- Set NTP
- Set Properties
- Set SNMP
- Set System
- Show
- Show CHAP
- Show FC
- Show FcipRoutes
- Show Features
- Show Initiators
- Show iSCSI
- Show iSNS
- Show Localmaps
- Show Logs
- Show Memory
- Show Mgmt
- Show NTP
- Show Performance
- Show Presented Initiators
- Show Presented Targets
- Show Properties
- Show Remotemaps
- Show Remotepeers
- Show SNMP
- Show Stats
- Show System
- Show Targets
- Show VLAN
- Shutdown
- Target
- Traceroute
- A Log Messages
- B Simple Network Management Protocol (SNMP)
- Index
4 – Command Reference
Command Syntax
4-68 SN0054659-00 A
S
Show Presented iSCSI Targets command example:
QRouter #> show presented_targets iscsi
Presented Target Information
------------------------------
iSCSI Presented Targets
-------------------------
Name
iqn.2000-04.com.qlogic:isr6142:0.50001fe150069d20.50001fe150069d2c
IP 10.3.5.66
<MAPS TO>
WWNN 50:00:1f:e1:50:06:9d:20
WWPN 50:00:1f:e1:50:06:9d:2c
Name
iqn.2000-04.com.qlogic:isr6142:1.50001fe150069d20.50001fe150069d2c
IP 10.3.5.67
<MAPS TO>
WWNN 50:00:1f:e1:50:06:9d:20
WWPN 50:00:1f:e1:50:06:9d:2c
Name
iqn.2000-04.com.qlogic:isr6142:0.50001fe150011150.50001fe150011158
IP 10.3.5.66
<MAPS TO>
WWNN 50:00:1f:e1:50:01:11:50
WWPN 50:00:1f:e1:50:01:11:58
Name
iqn.2000-04.com.qlogic:isr6142:1.50001fe150011150.50001fe150011158
IP 10.3.5.67
<MAPS TO>
WWNN 50:00:1f:e1:50:01:11:50
WWPN 50:00:1f:e1:50:01:11:58