user manual
Table Of Contents
- Table of Contents
- 1 Introduction
- 2 Command Usage
- 3 Configuring CHAP
- 4 Command Reference
- Command Listing
- Command Syntax
- Admin
- Beacon
- Clear
- Date
- FcipRoute
- FRU
- Help
- History
- Image
- Initiator
- Localmap
- Logout
- Password
- Ping
- Quit
- Reboot
- Remote Map
- Remote Peer
- Reset Factory
- Save
- Set
- Set CHAP
- Set FC
- Set Features
- Set iSCSI
- Set iSNS
- Set Mgmt
- Set NTP
- Set Properties
- Set SNMP
- Set System
- Show
- Show CHAP
- Show FC
- Show FcipRoutes
- Show Features
- Show Initiators
- Show iSCSI
- Show iSNS
- Show Localmaps
- Show Logs
- Show Memory
- Show Mgmt
- Show NTP
- Show Performance
- Show Presented Initiators
- Show Presented Targets
- Show Properties
- Show Remotemaps
- Show Remotepeers
- Show SNMP
- Show Stats
- Show System
- Show Targets
- Show VLAN
- Shutdown
- Target
- Traceroute
- A Log Messages
- B Simple Network Management Protocol (SNMP)
- Index
4 – Command Reference
Command Syntax
SN0054659-00 A 4-67
A
Show Presented Targets
Displays targets presented by the router: FC, iSCSI, or both.
Authority None
Syntax show presented_targets
fc
iscsi
Keywords fc
Specifies the display of FC presented targets.
iscsi
Specifies the display of iSCSI presented targets.
Examples Show Presented Targets command example where the interface is not specified:
QRouter #> show presented_targets
Presented Target Information
------------------------------
FC Presented Targets
----------------------
WWNN 20:01:00:c0:dd:0c:8b:e3
WWPN 21:01:00:c0:dd:0c:8b:e3
Port FC2
<MAPS TO>
WWNN 20:00:00:00:87:1d:fa:64
WWPN 22:00:00:00:87:1d:fa:64
iSCSI Presented Targets
-------------------------
Name
iqn.2004-08.com.qlogic:isr-6142.0608a00471.1.2200002037fd9cf7.2000002
037fd9cf7
Port GE2
<MAPS TO>
WWNN 20:00:00:20:37:fd:9c:f7
WWPN 22:00:00:20:37:fd:9c:f7
The following is an example of the Show Presented FC Targets command:
QRouter #> show presented_targets fc
No Presented Targets found.