user manual
Table Of Contents
- Table of Contents
- 1 Introduction
- 2 Command Usage
- 3 Configuring CHAP
- 4 Command Reference
- Command Listing
- Command Syntax
- Admin
- Beacon
- Clear
- Date
- FcipRoute
- FRU
- Help
- History
- Image
- Initiator
- Localmap
- Logout
- Password
- Ping
- Quit
- Reboot
- Remote Map
- Remote Peer
- Reset Factory
- Save
- Set
- Set CHAP
- Set FC
- Set Features
- Set iSCSI
- Set iSNS
- Set Mgmt
- Set NTP
- Set Properties
- Set SNMP
- Set System
- Show
- Show CHAP
- Show FC
- Show FcipRoutes
- Show Features
- Show Initiators
- Show iSCSI
- Show iSNS
- Show Localmaps
- Show Logs
- Show Memory
- Show Mgmt
- Show NTP
- Show Performance
- Show Presented Initiators
- Show Presented Targets
- Show Properties
- Show Remotemaps
- Show Remotepeers
- Show SNMP
- Show Stats
- Show System
- Show Targets
- Show VLAN
- Shutdown
- Target
- Traceroute
- A Log Messages
- B Simple Network Management Protocol (SNMP)
- Index
4 – Command Reference
Command Syntax
4-66 SN0054659-00 A
S
Show Presented Initiators
Displays initiators presented by the router: FC.
Authority None
Syntax show presented_initiators
Examples Show Presented Initiators command example:
QRouter #> show presented_initiators
Presented Initiator Information
---------------------------------
FC Presented Initiators
-------------------------
WWNN 20:01:00:c0:dd:0c:8b:e3
WWPN 21:01:00:c0:dd:0c:8b:e3
Port FC2
<MAPS TO>
WWNN 20:01:00:e0:8b:28:5f:3d
WWPN 21:01:00:e0:8b:28:5f:3d
WWNN 20:01:00:c0:dd:0c:8b:e2
WWPN 21:01:00:c0:dd:0c:8b:e2
Port FC1
<MAPS TO>
Name iqn.1991-05.com.microsoft:qlogic-09sd5i4l