user manual

4 – Command Reference
Command Syntax
4-64 SN0054659-00 A
S
Show Performance
Displays router performance data.
Authority None
Syntax show perf
byte
init_rbyte
init_wbyte
tgt_rbyte
tgt_wbyte
Keywords byte
Displays data transfer rate of each port (FC and GE).
init_rbyte
Displays initiator read transfer rate per port.
init_wbyte
Displays initiator write transfer rate per port.
tgt_rbyte
Displays target read transfer rate per port.
tgt_wbyte
Displays target write transfer rate per port.
Examples Show Performance (all) command example:
QRouter #> show perf
Port Bytes/s Bytes/s Bytes/s Bytes/s Bytes/s
Number (init_r) (init_w) (tgt_r) (tgt_w) (total)
------ -------- -------- -------- -------- --------
GE1 0 0 22M 26M 48M
GE2 0 0 49M 50M 99M
FC1 50M 52M 0 0 103M
FC2 20M 28M 0 0 49M