user manual
Table Of Contents
- Table of Contents
- 1 Introduction
- 2 Command Usage
- 3 Configuring CHAP
- 4 Command Reference
- Command Listing
- Command Syntax
- Admin
- Beacon
- Clear
- Date
- FcipRoute
- FRU
- Help
- History
- Image
- Initiator
- Localmap
- Logout
- Password
- Ping
- Quit
- Reboot
- Remote Map
- Remote Peer
- Reset Factory
- Save
- Set
- Set CHAP
- Set FC
- Set Features
- Set iSCSI
- Set iSNS
- Set Mgmt
- Set NTP
- Set Properties
- Set SNMP
- Set System
- Show
- Show CHAP
- Show FC
- Show FcipRoutes
- Show Features
- Show Initiators
- Show iSCSI
- Show iSNS
- Show Localmaps
- Show Logs
- Show Memory
- Show Mgmt
- Show NTP
- Show Performance
- Show Presented Initiators
- Show Presented Targets
- Show Properties
- Show Remotemaps
- Show Remotepeers
- Show SNMP
- Show Stats
- Show System
- Show Targets
- Show VLAN
- Shutdown
- Target
- Traceroute
- A Log Messages
- B Simple Network Management Protocol (SNMP)
- Index
4 – Command Reference
Command Syntax
SN0054659-00 A 4-49
A
Displays SCSI initiator information: iSCSI or FC.
iscsi [port_num]
Displays iSCSI port information and configuration.
isns [port_num]
Displays the router’s iSCSI name server (iSNS) configuration.
localmaps
Displays local mappings, FC to FC, iSCSI to FC, and FC to iSCSI.
logs
Displays contents of the router logs.
memory
Displays memory managed by router. Includes total and available.
mgmt
Displays the router’s management port (10/100) configuration.
ntp
Displays the router’s network time protocol (NTP) configuration.
perf
Displays router performance data.
presented_initiators
Displays initiators presented by the router.
presented_targets [fc or iscsi]
Displays targets presented by the router: FC, iSCSI, or both.
properties
Displays the router’s CLI (command line interface) properties.
remotemaps
Displays all remote maps that have been configured.
remotepeers
Displays all remote peers.
snmp
Displays the router’s simple network management protocol (SNMP) properties
and trap configurations.
stats