user manual

4 – Command Reference
Command Syntax
SN0054659-00 A 4-47
A
Set System
Configures the general router parameters.
Authority Admin session
Syntax set system
Examples Set System command example:
QRouter (admin) #> show system
A list of attributes with formatting and current values will follow.
Enter a new value or simply press the ENTER key to accept the current
value. If you wish to terminate this process before reaching the end
of the list press 'q' or 'Q' and the ENTER key to do so.
System Symbolic Name (Max = 64 characters) [ ]
System Log Level (Min = 0, Max = 3) [0 ]
All attribute values that have been changed will now be saved.