user manual
Table Of Contents
- Table of Contents
- 1 Introduction
- 2 Command Usage
- 3 Configuring CHAP
- 4 Command Reference
- Command Listing
- Command Syntax
- Admin
- Beacon
- Clear
- Date
- FcipRoute
- FRU
- Help
- History
- Image
- Initiator
- Localmap
- Logout
- Password
- Ping
- Quit
- Reboot
- Remote Map
- Remote Peer
- Reset Factory
- Save
- Set
- Set CHAP
- Set FC
- Set Features
- Set iSCSI
- Set iSNS
- Set Mgmt
- Set NTP
- Set Properties
- Set SNMP
- Set System
- Show
- Show CHAP
- Show FC
- Show FcipRoutes
- Show Features
- Show Initiators
- Show iSCSI
- Show iSNS
- Show Localmaps
- Show Logs
- Show Memory
- Show Mgmt
- Show NTP
- Show Performance
- Show Presented Initiators
- Show Presented Targets
- Show Properties
- Show Remotemaps
- Show Remotepeers
- Show SNMP
- Show Stats
- Show System
- Show Targets
- Show VLAN
- Shutdown
- Target
- Traceroute
- A Log Messages
- B Simple Network Management Protocol (SNMP)
- Index
4 – Command Reference
Command Syntax
4-26 SN0054659-00 A
S
----- ----------------------
0 20:00:00:e0:8b:08:5f:3d,21:00:00:e0:8b:08:5f:3d (Initiator)
1 20:00:00:d0:b2:00:19:f0,21:00:00:d0:b2:00:19:f0 (Init/Tgt)
Please select a REMOTE device from the list above ('q' to quit) : 0
NOTE: Both the LOCAL and REMOTE systems do not have the SMART-WRITE
feature, therefore the querying of the SMART-WRITE settings are not
applicable and will be skipped for this mapping. All attribute values
for that have been changed will now be saved.
Remotemap add command example with SMART-WRITE licenses:
QRouter (admin) #> remotemap add
The following wizard will create a mapping a device connected to the
local system and a device connected to the selected remote peer
system. If you wish to terminate this wizard before reaching the end
of the list press 'q' or 'Q' and the ENTER key to do so.
Index (System Info, Mgmt IP Address)
----- ------------------------------
0 iSR-6142.0608A00471(172.17.137.143)
Please select a REMOTE system from the list above ('q' to quit) : 0
Index (WWNN,WWPN/iSCSI Name)
----- ----------------------
0 20:01:00:e0:8b:28:5f:3d,21:01:00:e0:8b:28:5f:3d (Initiator)
1 20:00:00:e0:8b:08:5f:3d,21:00:00:e0:8b:08:5f:3d (Initiator)
Please select a LOCAL device from the list above ('q' to quit) : 0
Index (WWNN,WWPN/iSCSI Name)
----- ----------------------
0 20:00:00:14:c3:3d:d2:bf,22:00:00:14:c3:3d:d2:bf (Target)
1 20:00:00:14:c3:44:9b:86,22:00:00:14:c3:44:9b:86 (Target)
2 20:00:00:14:c3:44:9b:9d,22:00:00:14:c3:44:9b:9d (Target)
3 20:00:00:14:c3:44:9a:fa,22:00:00:14:c3:44:9a:fa (Target)
4 20:00:00:20:37:fd:9c:f7,22:00:00:20:37:fd:9c:f7 (Target)
5 20:00:00:20:37:fd:8a:b0,22:00:00:20:37:fd:8a:b0 (Target)
6 20:00:00:14:c3:3d:cf:80,22:00:00:14:c3:3d:cf:80 (Target)
7 20:00:00:14:c3:44:9a:f1,22:00:00:14:c3:44:9a:f1 (Target)
8 20:00:00:14:c3:44:9b:0b,22:00:00:14:c3:44:9b:0b (Target)
9 20:00:00:14:c3:44:9b:7c,22:00:00:14:c3:44:9b:7c (Target)
10 20:00:00:20:37:fd:8b:ab,22:00:00:20:37:fd:8b:ab (Target)
Please select a REMOTE device from the list above ('q' to quit) : 0