user manual
Table Of Contents
- Table of Contents
- 1 Introduction
- 2 Command Usage
- 3 Configuring CHAP
- 4 Command Reference
- Command Listing
- Command Syntax
- Admin
- Beacon
- Clear
- Date
- FcipRoute
- FRU
- Help
- History
- Image
- Initiator
- Localmap
- Logout
- Password
- Ping
- Quit
- Reboot
- Remote Map
- Remote Peer
- Reset Factory
- Save
- Set
- Set CHAP
- Set FC
- Set Features
- Set iSCSI
- Set iSNS
- Set Mgmt
- Set NTP
- Set Properties
- Set SNMP
- Set System
- Show
- Show CHAP
- Show FC
- Show FcipRoutes
- Show Features
- Show Initiators
- Show iSCSI
- Show iSNS
- Show Localmaps
- Show Logs
- Show Memory
- Show Mgmt
- Show NTP
- Show Performance
- Show Presented Initiators
- Show Presented Targets
- Show Properties
- Show Remotemaps
- Show Remotepeers
- Show SNMP
- Show Stats
- Show System
- Show Targets
- Show VLAN
- Shutdown
- Target
- Traceroute
- A Log Messages
- B Simple Network Management Protocol (SNMP)
- Index
B – Simple Network Management Protocol (SNMP)
Notifications
SN0054659-00 A B-13
A
Sensor Notification
The sensor notification indicates that the state for the specified sensor is not
normal. When the sensor returns to the normal state, this event is sent with the
qsrEventSeverity object set to clear.
qsrSensorNotification uses the following objects:
qsrSensorValue
qsrSensorState
qsrEventTimeStamp
qsrEventSeverity
Generic Notification
The generic notification reports events other than the defined event types. It
provides a description object that identifies the event in clear text.
qsrGenericEvent uses the following objects:
qsrEventTimeStamp
qsrEventSeverity
qsrEventDescription