user manual
Table Of Contents
- Table of Contents
- 1 Introduction
- 2 Command Usage
- 3 Configuring CHAP
- 4 Command Reference
- Command Listing
- Command Syntax
- Admin
- Beacon
- Clear
- Date
- FcipRoute
- FRU
- Help
- History
- Image
- Initiator
- Localmap
- Logout
- Password
- Ping
- Quit
- Reboot
- Remote Map
- Remote Peer
- Reset Factory
- Save
- Set
- Set CHAP
- Set FC
- Set Features
- Set iSCSI
- Set iSNS
- Set Mgmt
- Set NTP
- Set Properties
- Set SNMP
- Set System
- Show
- Show CHAP
- Show FC
- Show FcipRoutes
- Show Features
- Show Initiators
- Show iSCSI
- Show iSNS
- Show Localmaps
- Show Logs
- Show Memory
- Show Mgmt
- Show NTP
- Show Performance
- Show Presented Initiators
- Show Presented Targets
- Show Properties
- Show Remotemaps
- Show Remotepeers
- Show SNMP
- Show Stats
- Show System
- Show Targets
- Show VLAN
- Shutdown
- Target
- Traceroute
- A Log Messages
- B Simple Network Management Protocol (SNMP)
- Index
B – Simple Network Management Protocol (SNMP)
Notifications
B-12 SN0054659-00 A
S
Agent Start Up Notification
The agent startup notification indicates that the agent on the router has started
running.
qsrAgentStartup uses the following object:
qsrEventTimeStamp
Agent Shut Down Notification
The agent shut down notification indicates that the agent on the router is shutting
down.
qsrAgentShutdown uses the following object:
qsrEventTimeStamp
Network Port Down Notification
The network port down notification indicates that the specified network port is
down. The next time the port comes up, this event is sent with the
qsrEventSeverity object set to clear.
qsrNwPortDown uses the following objects:
qsrNwLinkStatus
qsrEventTimeStamp
qsrEventSeverity
Fibre Channel Port Down Notification
The Fibre Channel port down notification indicates that the specified Fibre
Channel port is down. The next time the port comes up, this event is sent with the
qsrEventSeverity object set to clear.
qsrFcPortDown uses the following objects:
qsrFcLinkStatus
qsrEventTimeStamp
qsrEventSeverity