user manual
Table Of Contents
- Table of Contents
- 1 Introduction
- 2 Command Usage
- 3 Configuring CHAP
- 4 Command Reference
- Command Listing
- Command Syntax
- Admin
- Beacon
- Clear
- Date
- FcipRoute
- FRU
- Help
- History
- Image
- Initiator
- Localmap
- Logout
- Password
- Ping
- Quit
- Reboot
- Remote Map
- Remote Peer
- Reset Factory
- Save
- Set
- Set CHAP
- Set FC
- Set Features
- Set iSCSI
- Set iSNS
- Set Mgmt
- Set NTP
- Set Properties
- Set SNMP
- Set System
- Show
- Show CHAP
- Show FC
- Show FcipRoutes
- Show Features
- Show Initiators
- Show iSCSI
- Show iSNS
- Show Localmaps
- Show Logs
- Show Memory
- Show Mgmt
- Show NTP
- Show Performance
- Show Presented Initiators
- Show Presented Targets
- Show Properties
- Show Remotemaps
- Show Remotepeers
- Show SNMP
- Show Stats
- Show System
- Show Targets
- Show VLAN
- Shutdown
- Target
- Traceroute
- A Log Messages
- B Simple Network Management Protocol (SNMP)
- Index

B – Simple Network Management Protocol (SNMP)
Management Information Base (MIB)
B-8 SN0054659-00 A
S
qsrFcPortWwn
qsrFcPortId
qsrFcPortType
qsrFcLinkStatus
qsrFcLinkRate
Sensor Table
This table contains a list of all the sensors on the router. There are as many
entries (rows) in this table as there are sensors.
qsrSensorTable
Syntax PhysAddress
Access Read only
Description The world-wide name for this port.
Syntax PhysAddress
Access Read only
Description The interface's 24-bit FC address identifier.
Syntax Unsigned32
Access Read only
Description The type of FC port, as indicated by the use
of the appropriate value assigned by IANA.
The IANA-maintained registry for FC port
types can be found at:
www.iana.org/assignments/fc-port-types
Syntax QsrLinkStatus
Access Read only
Description The current link status for this port.
Syntax QsrLinkRate
Access Read only
Description The current link rate for this port.
Syntax Sequence of QsrSensorEntry
Access Not accessible
Description A list of all the sensors on the router. There
are as many entries (rows) in this table as
there are sensors.