user manual
Table Of Contents
- Table of Contents
- 1 Introduction
- 2 Command Usage
- 3 Configuring CHAP
- 4 Command Reference
- Command Listing
- Command Syntax
- Admin
- Beacon
- Clear
- Date
- FcipRoute
- FRU
- Help
- History
- Image
- Initiator
- Localmap
- Logout
- Password
- Ping
- Quit
- Reboot
- Remote Map
- Remote Peer
- Reset Factory
- Save
- Set
- Set CHAP
- Set FC
- Set Features
- Set iSCSI
- Set iSNS
- Set Mgmt
- Set NTP
- Set Properties
- Set SNMP
- Set System
- Show
- Show CHAP
- Show FC
- Show FcipRoutes
- Show Features
- Show Initiators
- Show iSCSI
- Show iSNS
- Show Localmaps
- Show Logs
- Show Memory
- Show Mgmt
- Show NTP
- Show Performance
- Show Presented Initiators
- Show Presented Targets
- Show Properties
- Show Remotemaps
- Show Remotepeers
- Show SNMP
- Show Stats
- Show System
- Show Targets
- Show VLAN
- Shutdown
- Target
- Traceroute
- A Log Messages
- B Simple Network Management Protocol (SNMP)
- Index
B – Simple Network Management Protocol (SNMP)
Management Information Base (MIB)
SN0054659-00 A B-7
A
qsrFcPortEntry
QsrFcPortEntry
A Fibre Channel port entry consists of the following sequence of objects:
qsrFcPortRole
qsrFcPortIndex
qsrFcPortNodeWwn
Syntax QsrFcPortEntry
Access Not accessible
Description Each entry (row) contains information
about a specific FC port.
qsrFcPortRole QsrPortRole
qsrFcPortIndex Unsigned32
qsrFcPortNodeWwn PhysAddress
qsrFcPortWwn PhysAddress
qsrFcPortId PhysAddress
qsrFcPortType Unsigned32
qsrFcLinkStatus QsrLinkStatus
qsrFcLinkRate QsrLinkRate
Syntax QsrPortRole
Access Not accessible
Description The operational role of this port: FCP mode
or frame shuttle mode.
Syntax Unsigned32
Access Not accessible
Description A positive integer indexing each FC port in
a given role.
Syntax PhysAddress
Access Read only
Description The world-wide name of the node that
contains this port.