user manual
Table Of Contents
- Table of Contents
- 1 Introduction
- 2 Command Usage
- 3 Configuring CHAP
- 4 Command Reference
- Command Listing
- Command Syntax
- Admin
- Beacon
- Clear
- Date
- FcipRoute
- FRU
- Help
- History
- Image
- Initiator
- Localmap
- Logout
- Password
- Ping
- Quit
- Reboot
- Remote Map
- Remote Peer
- Reset Factory
- Save
- Set
- Set CHAP
- Set FC
- Set Features
- Set iSCSI
- Set iSNS
- Set Mgmt
- Set NTP
- Set Properties
- Set SNMP
- Set System
- Show
- Show CHAP
- Show FC
- Show FcipRoutes
- Show Features
- Show Initiators
- Show iSCSI
- Show iSNS
- Show Localmaps
- Show Logs
- Show Memory
- Show Mgmt
- Show NTP
- Show Performance
- Show Presented Initiators
- Show Presented Targets
- Show Properties
- Show Remotemaps
- Show Remotepeers
- Show SNMP
- Show Stats
- Show System
- Show Targets
- Show VLAN
- Shutdown
- Target
- Traceroute
- A Log Messages
- B Simple Network Management Protocol (SNMP)
- Index
B – Simple Network Management Protocol (SNMP)
Management Information Base (MIB)
B-6 SN0054659-00 A
S
qsrNetMask
qsrGateway
qsrMacAddress
qstNwLinkStatus
qsrNwLinkRate
Fibre Channel Port Table
This table contains a list of the Fibre Channel (FC) ports on the router.There are
as many entries in this table as there are FC ports on the router.
qsrFcPortTable
Syntax InetAddress
Access Read only
Description The subnet mask for this port.
Syntax InetAddress
Access Read only
Description The gateway for this port.
Syntax IMacAddress
Access Read only
Description The MAC address for this port.
Syntax QsrLinkStatus
Access Read only
Description The operational link status for this port.
Syntax QsrLinkRate
Access Read only
Description The operational link rate for this port.
Syntax Sequence of QsrFcPortEntry
Access Not accessible
Description A list of the FC ports on the router.There
are as many entries in this table as there
are FC ports on the router.