user manual
Table Of Contents
- Table of Contents
- 1 Introduction
- 2 Command Usage
- 3 Configuring CHAP
- 4 Command Reference
- Command Listing
- Command Syntax
- Admin
- Beacon
- Clear
- Date
- FcipRoute
- FRU
- Help
- History
- Image
- Initiator
- Localmap
- Logout
- Password
- Ping
- Quit
- Reboot
- Remote Map
- Remote Peer
- Reset Factory
- Save
- Set
- Set CHAP
- Set FC
- Set Features
- Set iSCSI
- Set iSNS
- Set Mgmt
- Set NTP
- Set Properties
- Set SNMP
- Set System
- Show
- Show CHAP
- Show FC
- Show FcipRoutes
- Show Features
- Show Initiators
- Show iSCSI
- Show iSNS
- Show Localmaps
- Show Logs
- Show Memory
- Show Mgmt
- Show NTP
- Show Performance
- Show Presented Initiators
- Show Presented Targets
- Show Properties
- Show Remotemaps
- Show Remotepeers
- Show SNMP
- Show Stats
- Show System
- Show Targets
- Show VLAN
- Shutdown
- Target
- Traceroute
- A Log Messages
- B Simple Network Management Protocol (SNMP)
- Index
B – Simple Network Management Protocol (SNMP)
Management Information Base (MIB)
SN0054659-00 A B-5
A
qsrNwPortRole
qsrNwPortIndex
qsrNwPortAddressMode
qsrIPAddressType
qsrIPAddress
qsrNetMask InetAddress
qsrGateway InetAddress
qsrMacAddress MacAddress
qsrNwLinkStatus QsrLinkStatus
qsrNwLinkRate QsrLinkRate
Syntax QsrPortRole
Access Not accessible
Description The operational role of this port:
management port, iSCSI port, a TOE.
Syntax Unsigned32
Access Not accessible
Description A positive integer indexing each network
port in a given role.
Syntax INTEGER
1 = Static
2 = DHCP
3 = Bootp
4 = RARP
Access Read only
Description The method by which the port gets its IP
address.
Syntax InetAddressType
Access Read only
Description The IP address type: ipv4 or ipv6.
Syntax InetAddress
Access Read only
Description The IP address of the port.