user manual
Table Of Contents
- Table of Contents
- 1 Introduction
- 2 Command Usage
- 3 Configuring CHAP
- 4 Command Reference
- Command Listing
- Command Syntax
- Admin
- Beacon
- Clear
- Date
- FcipRoute
- FRU
- Help
- History
- Image
- Initiator
- Localmap
- Logout
- Password
- Ping
- Quit
- Reboot
- Remote Map
- Remote Peer
- Reset Factory
- Save
- Set
- Set CHAP
- Set FC
- Set Features
- Set iSCSI
- Set iSNS
- Set Mgmt
- Set NTP
- Set Properties
- Set SNMP
- Set System
- Show
- Show CHAP
- Show FC
- Show FcipRoutes
- Show Features
- Show Initiators
- Show iSCSI
- Show iSNS
- Show Localmaps
- Show Logs
- Show Memory
- Show Mgmt
- Show NTP
- Show Performance
- Show Presented Initiators
- Show Presented Targets
- Show Properties
- Show Remotemaps
- Show Remotepeers
- Show SNMP
- Show Stats
- Show System
- Show Targets
- Show VLAN
- Shutdown
- Target
- Traceroute
- A Log Messages
- B Simple Network Management Protocol (SNMP)
- Index
A – Log Messages
Fatal Log Messages
SN0054659-00 A A-31
A
System
The system modules generate the fatal log messages listed in Table A-16 and
described following the table.
Table A-16. System—Fatal Log Messages
ID Log Message No.
233473 "memory monitor: Detected Uncorrectable Ecc %08lx system is
rebooting in 5 secs\n"
1
233474 "Failed to register interrupt handler!\n" 2
233475 "%s class_simple_create failed\n" 3
1 Uncorrectable memory error detected at address provided in log message.
2 Attempt to register the interrupt handler failed.
3 Failed class_simple_create system call from memory monitor initialization
routine.