user manual

A – Log Messages
Error Log Messages
A-10 SN0054659-00 A
S
Error Log Messages
The following sections list and describe the error log messages by reporting
module:
 “Application Modules” on page A-10
 “iSCSI Driver” on page A-18
 “Fibre Channel Driver” on page A-20
 “User Modules” on page A-22
 “System” on page A-25
Application Modules
The application modules generate the error log messages listed in Tab le A -8 and
described following the table.
Table A-8. Application Module—Error Log Messages
ID Log Message No.
40967 QLBA_NullDoorbell: driver unloaded, port disabled 7
40996 QLBA_ProcessTrb: Processing unsupported ordered tag
command
36
41004 QLBA_ProcessTrb: Processing unsupported head of queue tag
command
44
41058 QLBA_CreateTargetDeviceObject: Too many devices 98
41060 QLBA_CreateTargetNodeObject: Too many devices 100
41067 QLBA_CreateLunObject: LunObject memory unavailable 107
41077 QLBA_CreateInitiatorObject: Too many initiators 117
41096 QLBA_DisplayTargetOperationStatus: PCI Error, Status 0x%.2x 136
41106 QLBA_DisplayInitiatorOperationStatus: DMA Error, Status
0x%.2x
146
41107 QLBA_DisplayInitiatorOperationStatus: Transport Error, Status
0x%.2x
147
41111 QLBA_DisplayInitiatorOperationStatus: Data Overrun, Status
0x%.2x
151
41234 QLIS_LoginPduContinue: Operation failed. Initiator 0x%x, TPB
status 0x%x
274
41238 QLKV_ValidateLoginTransitCsgNsgVersion failed (status 0x%x) 278