user manual

A – Log Messages
Informational Log Messages
A-6 SN0054659-00 A
S
User Modules
The user modules generate the log messages listed in Table A-4 and described in
the following table.
768 FCIP - Fibre Channel link up occurred. Event status is reported, as is the
contents of the FC processor’s mailbox 1 register.
769 FCIP - Fibre Channel link down occurred.
770 FCIP - Fibre Channel link up occurred. Event status is reported, as is the
RunTimeMode (0 = loop, 1 = point-to-point).
Table A-4. User Modules—Informational Log Messages
ID Log Message No.
151842 FW Upgrade performed: new version is: %d.%d.%d.%d 290
151843 REBOOT/SHUTDOWN Command from user. Code=%d 291
151889 #%d: qapisetfcinterfaceparams_1_svc: FC port configuration
changed
337
151890 #%d: qapisetiscsiinterfaceparams_1_svc: iSCSI port
configuration changed
338
151891 #%d: qapisetisns_1_svc:iSNS configuration changed 339
151892 qapisetntpparams_1_svc: NTP configuration changed 340
151893 #%d: qapisetvlanparams_1_svc: VLAN configuration changed 341
151896 qapisetmgmintfcparams_1_svc:Management port configuration
changed
344
151897 qapisetbridgebasicinfo_1_svc:Bridge configuration changed 345
151898 qapimapremote_1_svc: Remotemap added for local device
%.2x:%.2x:%.2x:%.2x:%.2x:%.2x:%.2x:%.2x
346
151899 qapimapremote_1_svc: Remotemap added to remote device
%.2x:%.2x:%.2x:%.2x:%.2x:%.2x:%.2x:%.2x
347
151900 qapiunmapremote_1_svc: Remotemap removed for local device
%.2x:%.2x:%.2x:%.2x:%.2x:%.2x:%.2x:%.2x
348
151901 qapiunmapremote_1_svc: Remotemap removed to remote
device %.2x:%.2x:%.2x:%.2x:%.2x:%.2x:%.2x:%.2x
349
151902 qapimaptargettoinitiator_1_svc: Localmap added for initiator
%.2x:%.2x:%.2x:%.2x:%.2x:%.2x:%.2x:%.2x
350