user manual

IS0053301-00 D 3-1
Section 3
Windows 2000 Driver Installation
(QL4000.SYS)
3.1
Supported Features
The Windows 2000 driver (QL4000.sys) supports the iSCSI features provided by
the QLogic QLA40xx iSCSI PCI HBA.
3.2
Driver Files
The following files are provided for installation of the Windows 2000 driver:
■ \W2K\QLOGIC—Diskette identification file
■ \W2K\TXTSETUP.OEM—Driver installation script for text mode installation
■ \W2K\W2K\OEMSETUP.INF—Driver installation script
■ \W2K\W2K\QLPSEUDO.INF—QLogic pseudo LUN installation script
■ \W2K\W2K\QL4000.CAT—Catalog file
■ \W2K\W2K\QL4000.SYS—QLogic QL4000 PCI miniport driver
■ \W2K\W2K\RELEASE.TXT—Release notes
■ \W2K\W2K\README.TXT—Helpful hints about the driver
Be sure to review the README.TXT file for both new and changed information.
3.3
Creating the Driver Disk (Optional)
A driver disk is useful when installing the Windows 2000 driver. You can create the
driver disk after downloading the driver from the QLogic web site.
Follow these steps to create driver disk from the QLogic web site:
1. Locate the driver you want on the QLogic web site (www.qlogic.com
) and click
Download.
2. When prompted Would you like to open the file or save it to your
computer?, click the Save button. Specify a temporary location on the hard
drive and download the driver.
3. Insert a blank disk in drive A.
4. Run the self-extracting file you just downloaded, specifying A:\ for Unzip To
Folder.