QUICK START GUIDE [ Quick Start Guide ] 4000 SERIES ADAPTER INSTALLATION z
Purchasers of OEM products should consult with the OEM for support. Please feel free to contact your QLogic approved reseller or QLogic Technical Support at any phase of integration for assistance. QLogic Technical Support can be reached by the following methods: Web http://support.qlogic.com E-mail support@qlogic.com The QLogic knowledge database contains troubleshooting information for the QLogic host bus adapters. Access the data base from the QLogic Support Web page, http://support.qlogic.com.
Quick Start Guide Installation Instructions This Quick Start Guide describes how to install and configure your new QLogic host bus adapter in four simple steps: ■ ■ ■ ■ Step 1. Verify the package contents. Step 2. Install the adapter hardware. Step 3. Install the adapter driver. Step 4. Install the SANsurfer iSCSI HBA Manager application. Keep the host bus adapter in the antistatic bag until installation. The host bus adapter contains parts that can be damaged by electrostatic discharge (ESD).
HOST BUS ADAPTER LEVER SCREW 64-BIT PCI-X SLOT (QLA405x ADAPTERS) OR PCI EXPRESS x4, x8, x16 SLOT (QLE406xC ADAPTERS) ADAPTER RETAINING BRACKET SLOT COVERS SYSTEM CHASSIS Figure 1. Illustration of Server Motherboard and Slots Step 3. Install the Adapter Driver To install the adapter drivers: 1. Go to the QLogic Driver Downloads/Documentation page at http://driverdownloads.qlogic.com. 2. Click QLogic Products. 3.
Adapter LEDs Table 1. QLogic QLA4050 Host Bus Adapter LED Scheme Green LED On Activity Link established Table 2. QLogic QLA4050C/4052C and QLE4060C/4062C Host Bus Adapter LED Scheme Green LED On Flashing Activity Link established Receive/transmit activity Warranty For warranty details, please check the QLogic Web site at http://www.qlogic.com/Support/Pages/Warranty.aspx. Laser Safety FDA Notice This product complies with DHHS Rules 21CFR Chapter I, Subchapter J.
Agency Certification QLogic Adapters The following sections contain a summary of EMC/EMI test specifications performed on the QLogic host bus adapters to comply with radiated emission, radiated immunity, and product safety standards: EMI and EMC Requirements FCC Part 15 compliance: Class B FCC compliance information statement: This device complies with Part 15 of the FCC Rules.
Product Safety Compliance UL, cUL product safety compliance: UL60950 CSA C22.2 No.60950 Class 1 Laser Product per DHHS 21CFR (J) Complies with 21 CFR 1040.10 and 1040.11 Use only with listed ITE or equivalent.
© 2005–2011 QLogic Corporation. QLogic, the QLogic logo, and SANsurfer are trademarks or registered trademarks of QLogic Corporation. All other brands and product names are trademarks or registered trademarks of their respective owners. Information supplied by QLogic is believed to be accurate and reliable. QLogic Corporation assumes no responsibility for any errors in this brochure.
Corporate Headquarters QLogic Corporation 26650 Aliso Viejo Parkway Aliso Viejo, CA 92656 949.389.6000 www.qlogic.
