User's Manual

SANbox2-8c Fibre Channel Switch
Installation Guide
0
Index-2 59042-06 A
save B-11
controls 2-2
credits 3-4, A-2
critical error 5-1
D
Date command B-13
device
cabling 4-17
description 3-1
performance 3-6
diagnostics 5-1, 5-10, A-2
dimensions A-3
disk space 4-1
distance 3-4
domain ID
description 3-7
display B-56
lock 3-7
donor port 3-4, B-56
E
E_Port 2-7, 5-7
emissions standards A-5
environmental
conditions 4-2
specifications A-4
Ethernet
direct connection 4-5
indirect connection 4-5
port 2-7
event logging
by component B-44, B-73
by port B-45, B-74
by severity level B-73
display B-73
restore defaults B-45
save settings B-45
settings B-74
severity level B-45
start B-45
stop B-46
external test B-82
F
F_Port 2-6
fabric
aggregate bandwidth A-2
latency A-2
management 3-12, A-3
management switch 2-7
management workstation 4-1
point-to-point bandwidth A-2
ports 2-6
services 3-11
Fabric Device Management Interface B-56
factory defaults 5-14, B-25
Fallback command B-14
fan 2-9
Fan Fail LED 2-4, 5-11
fiber optic cable 3-1
Fibre Channel
ports 2-4
protocols A-1
File Transfer Protocol 4-20, 5-4
firmware
display versions 5-15
failure 5-2
image 5-15
image file B-19
install with CLI 4-19
install with FTP and CLI 4-20
install with SANsurfer Switch Manager 4-19
list image files B-19
non-disruptive activation 4-18, B-18
pending 5-15, B-14
remove image files B-19
retrieve image file B-19
unpack image 5-13, B-19
version B-62
FL_Port 2-6
flash memory 2-2, 4-21
frame size A-2
FRU - See Field Replaceable Unit
FTP - See File Transfer Protocol