User's Manual

B – Command Line Interface
Set Config Command
B-38 59042-06 A
0
Table B-11. Set Config Threshold Parameters
Parameter Description
Threshold Monitoring Enabled Master enable/disable parameter for all
events. Enables (True) or disables (False)
the generation of all enabled event alarms.
The default is False.
CRCErrorsMonitoringEnabled
DecodeErrorsMonitoringEnabled
ISLMonitoringEnabled
LoginMonitoringEnabled
LogoutMonitoringEnabled
LOSMonitoringEnabled
The event type enable/disable parameter.
Enables (True) or disables (False) the
generation of alarms for each of the
following events:
 CRC errors
 Decode errors
 ISL connection count
 Device login errors
 Device logout errors
 Loss-of-signal errors
Rising Trigger The event count above which a rising
trigger alarm is logged. The switch will not
generate another rising trigger alarm for
that event until the count descends below
the falling trigger and again exceeds the
rising trigger.
Falling Trigger The event count below which a falling
trigger alarm is logged. The switch will not
generate another falling trigger alarm for
that event until the count exceeds the
rising trigger and descends again below
the falling trigger.
Sample Window The period of time in seconds in which to
count events.