User manual
Rolera Thunder User Manual 11
Figure 8. Required Settings for Non-Overlap Mode Operation
Example:
Non-Overlap
Mode
Operation in Non-Overlap mode is illustrated in the timing diagram below. In this example, the
exposure time is 10 ms and the readout time is 34.8ms. The total time to take 3 frames is 134.4
ms (3 × 10 ms + 3× 34.8 ms), equivalent to a frame rate of 22.3 fps (3 frames ÷ 0.134 seconds).
Note: The exposure and readout times listed are for illustration purpose only. Actual values may vary. Refer
to the product data sheet for the actual readout times.
Figure 9. Timing Diagram for Non-Overlap Mode
Referring to
Figure 9, it can be seen that exposure and readout are carried out in non-overlapped fashion. As
a result, each frame in the sequence is precisely exposed for the time specified (i.e., 10 ms).
Readout
Effective
Exposure Time
Exp #2
10 ms
Exp #3
10 ms
Readout #1
34.8 ms
Readout #2
34.8 ms
Readout #3
34.8 ms
Total time for 3 frames is approximately 134.4 ms
Clears
Exp #1
10 ms
Select these parameters to
operate your Rolera
Thunder camera in Non-
Overlap mode.