User manual

Rolera Thunder User Manual 5
Chapter 2
System Installation
Carefully review the Precautions section in the previous chapter before performing any of the procedures
outlined here. Again, use only a Rolera Thunder data cable and a Rolera Thunder FireWire interface card
with your Rolera Thunder camera. Using a different cable or interface card may result in permanent damage
to your system.
Introduction
Your Rolera Thunder camera system has the following hardware components:
• Camera head
• FireWire interface card
• Data cable
• Power supply with power cord
• Red test lens
• CD-ROM
• Quick installation Guide
Rolera Thunder system components are linked by the data cable and controlled by your host
computer system. All of these hardware components should be included with your shipment.
Refer to the information and figures in the System Components section (Chapter 1).
Keep all the original packing materials so you can safely ship the Rolera Thunder system to
another location or return it for service if necessary.
If you have any difficulty with any step of the instructions, call QImaging Customer Service.
Software
Compatibility
Requirements
The Rolera Thunder package includes the PVCAM drivers designed for use with this camera.
All other imaging software must also be PVCAM-compatible. For full access to Rolera Thunder
hardware functions, the current version of PVCAM must be used.