Cut Sheet

α
[% / K] +0.04
β
[% / K] −0.27
γ
[% / K] −0.35 NMOT [°F] 109 ± 5.4 (43 ± 3 °C)
Hanwha Q CELLS America Inc.
400 Spectrum Center Drive, Suite 1400, Irvine, CA 92618, USA | TEL [phone] | EMAIL [e-mail] | WEB www.q-cells.us
[V] 1500 (IEC) / 1500 (UL) II
[A DC] 20 C (IEC) / TYPE 1 (UL)
[lbs / ft
2
] 75 (3600 Pa) / 33 (1600 Pa)
−40 °F up to +185 °F
(−40 °C up to +85 °C)
[lbs / ft
2
] 113 (5400 Pa) / 50 (2400 Pa)
3
See Installation Manual
29
26
22
84.6 × 45.3 × 48.0 in (2150 × 1150 × 1220 mm)
1717 lbs (779 kg)
Certified
UL 1703
(254141)
415 420 425 430
[W] 415 420 425 430
[A] 10.69 10.74 10.78 10.83
[V] 48.59 48.84 49.09 49.33
[A] 10.18 10.22 10.27 10.31
[V] 40.77 41.08 41.39 41.70
[%] ≥ 19.4 ≥ 19.6 ≥ 19.8 ≥ 20.1
[W] 310.8 314.5 318.3 322.0
[A] 8.61 8.65 8.69 8.72
[V] 45.82 46.05 46.29 46.52
[A] 8.01 8.05 8.08 8.12
[V] 38.79 39.09 39.38 39.67
MECHANICAL SPECIFICATION
Format
81.9 in × 40.6 in × 1.38 in (including frame)
(2080 mm × 1030 mm × 35 mm)
Weight 55.1 lbs (25.0 kg)
Front Cover 0.13 in (3.2 mm) thermally pre-stressed glass with
anti-reflection technology
Back Cover Composite film
Frame Anodized aluminum
Cell 6 × 24 monocrystalline Q.ANTUM solar half cells
Junction Box 2.09-3.98 in × 1.26-2.36 in × 0.59-0.71 in
(53-101 mm × 32-60 mm × 15-18 mm), IP67, with bypass diodes
Cable 4 mm² Solar cable; (+) ≥ 55.1 in (1400 mm), (−) ≥ 55.1 in (1400 mm)
Connector Stäubli MC4-Evo2, Hanwha Q CELLS HQC4, Amphenol UTX,
Renhe 05-8, JMTHY JM601A; Tongling Cable01S-F, IP68 or
Friends PV2e; IP67
Note: Installation instructions must be followed. See the installation and operating manual or contact our technical service department for further information on approved installation and use
of this product.
Specifications subject to technical changes © Q CELLS Q.PEAK DUO L-G8.2_415-430_2019-07_Rev01_NA
ELECTRICAL CHARACTERISTICS
POWER CLASS
MINIMUM PERFORMANCE AT STANDARD TEST CONDITIONS, STC
1
(POWER TOLERANCE +5 W / −0 W)
Minimum
Power at MPP
1
P
MPP
Short Circuit Current
1
I
SC
Open Circuit Voltage
1
V
OC
Current at MPP I
MPP
Voltage at MPP V
MPP
Efficiency
1
η
MINIMUM PERFORMANCE AT NORMAL OPERATING CONDITIONS, NMOT
2
Minimum
Power at MPP P
MPP
Short Circuit Current I
SC
Open Circuit Voltage V
OC
Current at MPP I
MPP
Voltage at MPP
V
MPP
1
Measurement tolerances P
MPP
± 3 %; I
SC
; V
OC
± 5 % at STC: 1000 W/m
2
, 25 ± 2 °C, AM 1.5 according to IEC 60904-3 •
2
800 W/m², NMOT, spectrum AM 1.5
Q CELLS PERFORMANCE WARRANTY PERFORMANCE AT LOW IRRADIANCE
At least 98 % of nominal power during
first year. Thereafter max. 0.54 %
degradation per year. At least 93.1 %
of nominal power up to 10 years. At
least 85 % of nominal power up to
25years.
All data within measurement toleranc-
es. Full warranties in accordance with
the warranty terms of the Q CELLS
sales organisation of your respective
country.
Typical module performance under low irradiance conditions in
comparison to STC conditions (25 °C, 1000 W/m²)
TEMPERATURE COEFFICIENTS
Temperature Coefficient of I
SC
Temperature Coefficient of V
OC
Temperature Coefficient of P
MPP
Normal Module Operating Temperature
PROPERTIES FOR SYSTEM DESIGN
Maximum System Voltage V
SYS
Safety Class
Maximum Series Fuse Rating Fire Rating based on ANSI / UL 1703
Max. Design Load, Push / Pull
3
Permitted Module Temperature
on Continuous Duty
Max. Test Load, Push / Pull
3
QUALIFICATIONS AND CERTIFICATES PACKAGING INFORMATION
UL 1703, CE-compliant, IEC 61215:2016, IEC 61730:2016,
Application Class II, U.S. Patent No. 9,893,215 (solar cells)
Number of Modules per Pallet
Number of Pallets per 53' Trailer
Number of Pallets per 40' HC-Container
Pallet Dimensions (L × W × H)
Pallet Weight
ASYMMETRIC Q.PEAK DUO L-G6.1/L-G6.2
MIDRAIL
40.6"
(1030 mm)
51.5" (1308 mm)
81.9" (2080 mm)
1.38" (35 mm)
4 × Mounting slots (DETAIL A)
8 × Drainage holes
0.12 × 0.24
" (3 × 6 mm)
Frame
DETAIL A
0.63" (16 mm)
0.33
" (8.5 mm)
1.0" (25.5 mm)
38.5"
(979 mm)
DETAIL B
0.39" (10 mm)
0.28" (7 mm)
0.98" (25 mm)
4 × Mounting slots system Tracker (DETAIL B)
38.6
"
(980 mm)
15.7" (400 mm)
NA
15.2" (386 mm)
Label
4 × Grounding holes, Ø 0.18" (4.5 mm)
≥55.1" (1400 mm)
4 × Drainage holes
≥55.1" (1400 mm)
EN
RELATIVE EFFICIENCY
COMPARED TO NOMINAL POWER [%]
100
95
90
85
80
75
155 25200 10
YEARS
98
Q CELLS
Industry standard for tiered warranties
*
Industry standard for linear warranties
*
*
Standard terms of guarantee for the 10 PV companies
with the highest production capacity in 2014 (as at: September 2014)
200 400 600 800 1000
110
100
90
80
RELATIVE EFFICIENCY [%]
IRRADIANCE [W/m²]