Cut Sheet

76.4 in
1940 mm
43.3 in
1100 mm
48.0 in
1220 mm
1656 lbs
751 kg
24 24 32
α
[% / K] +0.04
β
[% / K] −0.27
γ
[% / K] −0.34 NMOT [°F] 109 ± 5.4 (43 ± 3 °C)
Hanwha Q CELLS America Inc.
400 Spectrum Center Drive, Suite 1400, Irvine, CA 92618, USA | TEL [phone] | EMAIL [e-mail] | WEB www.q-cells.us
[V] 1000 (IEC) / 1000 (UL) Class II
[A DC] 20 TYPE 2
[lbs/ft
2
] 75 (3600 Pa) / 55 (2660 Pa)
−40 °F up to +185 °F
(−40 °C up to +85 °C)
[lbs/ft
2
] 113 (5400 Pa) / 84 (4000 Pa)
3
See Installation Manual
385 390 395 400 405
[W] 385 390 395 400 405
[A] 11.04 11.07 11.10 11.14 11.17
[V] 45.19 45.23 45.27 45.30 45.34
[A] 10.59 10.65 10.71 10.77 10.83
[V] 36.36 36.62 36.88 37.13 37.39
[%] ≥ 19.6 ≥ 19.9 ≥ 20.1 ≥ 20.4 ≥ 20.6
[W] 288.8 292.6 296.3 300.1 303.8
[A] 8.90 8.92 8.95 8.97 9.00
[V] 42.62 42.65 42.69 42.72 42.76
[A] 8.35 8.41 8.46 8.51 8.57
[V] 34.59 34.81 35.03 35.25 35.46
53'
40' HC
Certified
UL 61730
MECHANICAL SPECIFICATION
Format
74.0 in × 41.1 in × 1.26 in (including frame)
(1879 mm × 1045 mm × 32 mm)
Weight 48.5 lbs (22.0 kg)
Front Cover 0.13 in (3.2 mm) thermally pre-stressed glass with
anti-reflection technology
Back Cover Composite film
Frame Black anodized aluminum
Cell 6 × 22 monocrystalline Q.ANTUM solar half cells
Junction Box 2.09-3.98 in × 1.26-2.36 in × 0.59-0.71 in
(53-101 mm × 32-60 mm × 15-18 mm), IP67, with bypass diodes
Cable 4 mm² Solar cable; (+) ≥ 49.2 in (1250 mm), (−) ≥ 49.2 in (1250 mm)
Connector Stäubli MC4; IP68
Note: Installation instructions must be followed. See the installation and operating manual or contact our technical service department for further information on approved installation and use of
this product.
Specifications subject to technical changes © Q CELLS Q.PEAK DUO BLK ML-G10+_385-405_DA_2022-02_Rev01_NA
ELECTRICAL CHARACTERISTICS
POWER CLASS
MINIMUM PERFORMANCE AT STANDARD TEST CONDITIONS, STC
1
(POWER TOLERANCE +5 W / −0 W)
Minimum
Power at MPP
1
P
MPP
Short Circuit Current
1
I
SC
Open Circuit Voltage
1
V
OC
Current at MPP I
MPP
Voltage at MPP V
MPP
Efficiency
1
η
MINIMUM PERFORMANCE AT NORMAL OPERATING CONDITIONS, NMOT
2
Minimum
Power at MPP P
MPP
Short Circuit Current I
SC
Open Circuit Voltage V
OC
Current at MPP I
MPP
Voltage at MPP
V
MPP
1
Measurement tolerances P
MPP
± 3 %; I
SC
; V
OC
± 5 % at STC: 1000 W/m
2
, 25 ± 2 °C, AM 1.5 according to IEC 60904-3 •
2
800 W/m², NMOT, spectrum AM 1.5
Q CELLS PERFORMANCE WARRANTY PERFORMANCE AT LOW IRRADIANCE
At least 98 % of nominal power during
first year. Thereafter max. 0.5 %
degradation per year. At least 93.5 %
of nominal power up to 10 years. At
least 86 % of nominal power up to
25years.
All data within measurement toleranc-
es. Full warranties in accordance with
the warranty terms of the Q CELLS
sales organisation of your respective
country.
Typical module performance under low irradiance conditions in
comparison to STC conditions (25 °C, 1000 W/m²)
TEMPERATURE COEFFICIENTS
Temperature Coefficient of I
SC
Temperature Coefficient of V
OC
Temperature Coefficient of P
MPP
Nominal Module Operating Temperature
PROPERTIES FOR SYSTEM DESIGN
Maximum System Voltage V
SYS
PV module classification
Maximum Series Fuse Rating Fire Rating based on ANSI / UL 61730
Max. Design Load, Push / Pull
3
Permitted Module Temperature
on Continuous Duty
Max. Test Load, Push / Pull
3
NA
DETAIL A
0.63" (16 mm)
0.33" (8.5 mm)
0.96" (24.5 mm)
42.8" (1088 mm)
74.0" (1879 mm)
4 × Mounting slots (DETAIL A)
Frame
41.1" (1045 mm)
39.2" (996 mm)
1.26" (32 mm)
8 × Drainage holes
15.6“ (395.5 mm)
4 × Grounding points ø 0.18" (4.5 mm)
Label
≥ 49.2" (1250 mm)
≥ 49.2" (1250 mm)
EN
RELATIVE EFFICIENCY
COMPARED TO NOMINAL POWER [%]
YEARS
Q CELLS
Industry standard for linear warranties
*
*
Standard terms of guarantee for the 10 PV companies
with the highest production capacity in 2014 (as at: September 2014)
100
95
90
85
80
155 25200 10
98
86
200 400 600 800 1000
110
100
90
80
RELATIVE EFFICIENCY [%]
IRRADIANCE [W/m²]
QUALIFICATIONS AND CERTIFICATES PACKAGING INFORMATION
UL 61730, CE-compliant,
Quality Controlled PV - TÜV Rheinland,
IEC 61215:2016, IEC 61730:2016,
U.S. Patent No. 9,893,215 (solar cells),
Horizontal
packaging pallets pallets modules