Quick Setup Guide

Now we’ve got the required software, it’s time to
get the Vektor hardware set up. Plug the power
cable into Vektor and then into an electrical
socket. The Vektor comes with a universal
power adapter, just attach the correct plug to
the adapter. There is also a USB power adapter
cable supplied in the box taht can be used.
Once your Vektor is connected to power, you
will have to wait a couple of seconds for it to
initialize and for the LED to turn white (if you
have not connected the Vektor to the network it
will turn red, so jump ahead to step 4...) At this
point the Vektor is ready for setup and app
pairing.
Plug in the Vektor
STEP 3
4