User Manual

Turnigy 9XR
Prerequisites: choose a memory for Q -BOT model and configure the transmitter :
. 8CH PPM 300uSec
. Channel Order = > RETA
. Limits => INV = ch1 , ch2 = NORM , INV = ch3 , ch4 = INV , INV = ch5
. Mixer => THR = ch1 , ch2 = AIL , ELEV = ch3 , ch4 = RUD , ch5 = Full GEA
. to slow the machine EXPO AIL = 50%, ELEV = 65% , RD = 50%
To fly the Q -Bot :
1 - Switch off the transmitter, (if it was turned on).
2 - Connect the "RADIO ADAPTER 2.4 GHZ " on the training port ( DSC ) . The screen of the transmitter
lights .
3 - Acknowledge any alarm transmitter (press EXIT repeatedly to get the screen normally displayed to the
flight)
4 - Turn on "RADIO ADAPTER 2.4 GHz " ( the LED "signal" turns red )
5 - In the five or six seconds , plug the battery of the Q -BOT. A green LED flashes quickly. Do not touch the
Q -Bot to let the gyros initialize). The green LED lights continuously. the 4 propellers rotate about 1 second
to confirm the initialization, and the Q -Bot is now ready to fly . If the LED is off, the Q -Bot is not in
conected with the "RADIO ADAPTER 2.4 GHz ."