User Manual

E. Fail-safe
Motor will stop after 2 seconds when the flight control cannot receive the right signal.
F. Flight control parameter adjustment
The flight control can set up flight control sensitivity by the remote control sensitivity
channel (GEAR). 50% as the dividing line, when sensitivity value is greater than 50%, it is
the normal mode, the greater the sensitivity is, even more stable the aircraft is. So we
advise beginner to adjust it to about 80 on the first flights. When the sensitivity value is
less than 50%, it is 3D mode, the smaller the sensitivity is, even more stable the aircraft
is. At the same time the action of control is large, suitable for experienced users.
G. Transmitter Settings
This is my settings for Spektrum DX6i
Model: HELI
Reverse: THRO=R; AILE=R; ELEV=R; RUDD=R;
D/R: Is set to 50% on all the channels (now it is very easy to fly)
Swash Type: 1 SERVO NORM
Swash Type: 1 SERVO NORM Single Servo mode no mixing