Product Brochure

Crossover

Great care has been taken in both the design of the crossover and

the selection of high grade components, to introduce virtually zero

noise and distortion. The 4th-order Linkwitz-Riley topology which

gives an excellent response both on and off-axis.

Cabinet Bracing

A method, known as P2P™ (Point to Point) bracing, supports

the parts of the cabinet that need to be stiffened to deal with low

frequency panel vibrations.

Cabinet Walls

Constructed in three separate layers and lled under pressure with

a non-setting gel, this damps the cabinet walls and converts higher

frequency vibrations into heat.

High Frequency Driver

Mechanically decoupled mounting which effectively isolates the HF

driver and speaker cabinet from reciprocal vibrations that would

otherwise be transmitted between them.

Mid/Bass Drivers

The Mid/Bass voice coil has an uncommonly large diameter of

35mm which allows increased ‘shove’ and higher power handling -

as well as reducing compression.

Pressure Equalisers

Tall loudspeakers tend to suffer from resonances caused by

unwanted pressure gradients. Specially designed Helmholtz