User manual

5-1 RECORD SETUP

Record setup enables the users to enable or disable the recording modes, as well as

the recording quality and frame rate. Please click on the recording modes you wish to

enable.

Note that, to enable motion detection or sensor detect in schedule, please enable

(1) ”Schedule – Motion” and “Schedule - Sensor”, as well as (2) enable these

function in the event setup. For detail, please refer to Section 5-2.1 on motion

detection and Section 5-2.2 for sensor.

Table 5-1.1 The options in record setup

Item Description

HDD FULL

Select STOP to stop recording or OVERWRITE to reuse the

HDD when HDD is full

「STOP」：Stop recording when HDD is full.

「OVERWRITE」：Start to overwrite that begin from the oldest

data of HDD, and continue to record.

RECORD NORMAL

Enable∕disable normal recording