User manual

65H.264 Network DVR User Manual
SECTION 6: LOCAL AND REMOTE OPERATION
3. Click the + (Add) button in the lower left corner of
the screen. A New Item entry will appear.
4. Tap the Addressbook entry you added to highlight it,
then tap the submenu icon,
, for additional
settings.
Submenu Icon
5. In the Setting screen, tap the item you want to
specify, then key in the appropriate information.
Press Done to complete each entry.
Specify the Title, IP Address, Port (if other than 80),
Username and Password for your DVR. If the DVR is
setup with a dynamic IP address and you use a web-
based service, such as DynDNS, to connect to your
DVR, enter your DVR URL into the IP address eld.
6. If your DVR system has audio capability, set the
Audio option to ON. For channel selection, tap the
submenu icon,
, for additional settings.
7. Tap the Get Type button to see if you can connect
to your DVR. If a connection is successful, the DVR
type will appear in the eld to the right. Otherwise,
change the network settings as needed, then tap
Get Type again to connect to the DVR.
8. If the connection was successful, press the
Save button in the upper right corner to return to
Addressbook.