User manual

www.supercircuits.com

SECTION 6: LOCAL AND REMOTE OPERATION

NOTE

If you’re not prompted to enter a Userid and Password, and the error message 10060 appears,

go to Edit > Preferences > QuickTime Preferences, and select “Streaming Transport” from the

drop-down list. Select “Use HTTP”, and keep the port ID as 80.

6. When the login is successful, you will see the live view from the DVR.

6.5 SC Mobile App for iPhone

SC Mobile Phone Surveillance provides access to your DVR video and audio through an Apple

iPhone

The application, SC Mobile, can be downloaded for free from the Apple App Store.

SC Mobile includes the following features:

• Address Book (1 entry)

• Auto playback after an event alarm is triggered

• PTZ Preset Point Setting

• Real Time Video Streaming

• Real Time Audio Streaming

• Video Quality Control

• Auto Re-login

• PTZ Hot Point Control

NOTE

The network on which your DVR is installed must be congured to allow access to the DVR

through the Internet. Refer to your DVR reference manual and the Supercircuits “DVR Networking

Guide” for specic guidelines for setting up your DVR on a network with Internet access.

NOTE

To stream video data to your iPhone with the SC Mobile app, you must rst connect your

iPhone to a Wi-Fi network. For more information about Wi-Fi connectivity and your iPhone, refer

to your user documentation and your service provider.

6.5.1 Installation

To install SC Mobile:

1. On your iPhone, open the App Store.