User manual

52
www.supercircuits.com
SECTION 6: LOCAL AND REMOTE OPERATION
Table 5. Video Viewer backup window parameters
Function Description
HDD Number/
channel
Specify the HDD number and channel associated with the video data you want.
Download by Time In the “Start Time” and “End Time” columns specify the time range within which the video data was
recorded.
Download by Event Select an incident from the event list. The list shows all logs in the DVR from latest to earliest.
- To nd the events you want to see, check or uncheck the event type System/Manual/Alarm/Motion,
then select the log you want.
- Click “Prev. Page” or “Next Page” to page through the log list.
- Click “Reload” to refresh the event list.
File Path Assign the location where backup les are saved.
Simultaneous
Playback
To view backup images while a download is in progress, select the checkbox “Simultaneous Playback”.
To backup images without previewing, deselect the checkbox “Simultaneous Playback”. You will only see
a message box indicating the total time needed, the current status, and the saving location.
Download/Cancel Click “Download” to start or “Cancel” to discard the video backup.
6.2.5 E-Map features
Video Viewer provides network device control and management (E-Map) for up to 16 devices
simultaneously. E-Map is available only when the control panel is set to full-function view.