User manual

39H.264 Network DVR User Manual
SECTION 4: DVR SOFTWARE USAGE
• CHANNEL – Select channels by pressing ENTER to toggle the icon in front of the channel number.
- The R (checked box) icon indicates that this channel is selected for backup.
- The
* icon indicates that this channel is not selected for backup.
• HDD NUM – Press ENTER to select the HDD containing the data you need.
• START – Press ENTER to start copying data to the USB ash drive.
4.8.2 DISK BACKUP (selected models)
Video/audio les can be copied to the CD or DVD drive installed in the DVR. In the BACKUP menu, move
to DISK BACKUP, then press ENTER to open the submenu.
Submenu parameters are similar to the USB BACKUP parameters. Included are:
• START TIME – Select the start time of the backup data.
• END TIME – Select the end time of the backup data.
• AVAILABLE SIZE – Display the available capacity in the CD/DVD disk media.
• CHANNEL – Select channels by pressing ENTER to change the symbol in front of the channel
number.
- The R (checked box) icon indicates that this channel is selected for backup.
- The
* icon indicates that this channel is not selected for backup.
• HDD NUM – Press ENTER to select the HDD containing the data you need.
• START – Press ENTER to start copying data to the CD/DVD.
To perform a disk backup, follow the general procedure:
1. Press EJECT to open the disk tray. Insert a CD or DVD into the DVD writer then press EJECT again
to close the disk tray.