User manual
31H.264 Network DVR User Manual
SECTION 4: DVR SOFTWARE USAGE
Submenu parameters include:
• MANUAL RECORD ENABLE – Set the manual recording function ON or OFF.
• EVENT RECORD ENABLE – Set the event recording function ON or OFF.
• TIMER RECORD ENABLE – Set the timer recording function ON or OFF.
• EVENT RECORD IPS – Select the images per second (IPS) for EVENT RECORD (recording that is
triggered by an alarm or motion detection).
NOTE
Different DVR models can record at different rates. See “Specications”.
• TIMER RECORD IPS – Select the IPS for TIMER RECORD (scheduled recording).
• OVERWRITE – Select ON to overwrite previous recorded data in your HDD when the HDD is full.
When this function is ON and the HDD is full, the DVR will clear the oldest 8 GB data without notice
to continue recording.
• EVENT RECORD ALL CHANNELS – Select to record all channels (ON) or record the channel with
an event only (OFF).
• KEEP DATA LIMITS (DAYS) – Assign the maximum number of days to keep recorded data (01
to 31). Data older than the specied number of days will be removed. Select OFF to disable this
feature.
4.5.8 REMOTE
Use this menu to setup remote devices (cameras, etc.). Move to REMOTE, then press ENTER to open the
submenu. The REMOTE screen shows the current settings.