User manual

www.supercircuits.com

SECTION 4: DVR SOFTWARE USAGE

The submenu parameters include:

• DE-INTERLACE – Select ON or OFF to enable or disable the de-interlace function.

NOTE

If you set the recording image size as FRAME, set DE-INTERLACE to ON. If you set the recording

image size as CIF, set DE INTERLACE to OFF.

• QUAD DWELL DURATION (SEC) (selected models) – Set the quad dwell duration time to 3, 5, 10,

or 15 seconds.

• FULL SCREEN DWELL DURATION (SEC) – Set the full screen dwell duration time to 3, 5, 10, or

15 seconds.

• VGA OUTPUT – Select the VGA output resolution. Options include: 800 x 600 / 1024 x 768

(default) / 1280 x 1024 / 1440 x 900 / 1400 x 1050 / 1680 x 1050 / 1600 x 1200.

NOTE

For the best image quality on your monitor, make sure that the selected DVR VGA output

resolution is supported by your monitor, and the monitor is set to that resolution.

If the image is not positioned or scaled properly, make adjustments to the monitor settings. Refer to

your monitor user manual.

• DISPLAY COVERT – Select ON or OFF to display or hide the wording COV when covert recording is

activated on the CAMERA channel.

• HDD DISPLAY MODE – Select SIZE to show the remaining HDD capacity (in GB) for recording, or

TIME to show the remaining recording time.

4.5.7 RECORD

Use this menu to setup the record features of the DVR. Move to RECORD, then press ENTER to open the

submenu. The RECORD screen shows the current settings.