User manual

26
www.supercircuits.com
SECTION 4: DVR SOFTWARE USAGE
The submenu items are described below:
• EXT. ALERT – Select ON or OFF to enable or disable a sound when any external alarm is triggered.
• INT. BUZZER – Select ON or OFF to enable or disable a sound for all internal conditions: KEY,
VLOSS, MOTION BUZZER, and ALARM. When INT. BUZZER is ON, KEY BUZZER, VLOSS BUZZER,
MOTION BUZZER, and ALARM BUZZER can individually be set to ON or OFF.
— KEY BUZZER – Set ON or OFF to enable or disable a sound when pressing the buttons on the
front panel.
— VLOSS BUZZER – Set ON/OFF to enable/disable a sound when video loss happened.
— MOTION BUZZER – Set ON/OFF to enable/disable a sound when any motion alarm is sensed.
— ALARM BUZZER – Set ON/OFF to enable/disable a sound when any internal alarm is sensed.
— HDD BUZZER – Set ON/OFF to enable/disable a sound when the HDD remaining capacity
reaches to the value set in HDD NEARLY FULL (GB).
— ALARM DURATION (SEC) – Press the p and/or q buttons to set the duration time of alarm
recording in second (5/10/20/40).
— HDD NEARLY FULL (GB) – If HDD BUZZER is ON, press the p and/or q buttons to select
the HDD free space threshold at which the alert will occur. Values are 5, 10, 15, or 20 GB.
4.5.4 Network
Use this menu to setup network TCP/IP parameters. Move to NETWORK then press ENTER to open
the submenu. The NETWORK screen shows the current network settings. Submenus show parameters
relevant to the NETWORK TYPE selected. Options are STATIC, DHCP, or PPOE.