User manual

23H.264 Network DVR User Manual
SECTION 4: DVR SOFTWARE USAGE
CAMERA submenu items are described below. While changing the camera setting, you can see the
affect on the camera image.
• TITLE – The name of the camera channel. The default title is “CH” and the channel number. Move
to the camera title you want to change. then press ENTER to open the character selection screen.
Camera names can have up to six characters (alphanumeric characters and some symbols).
• BRIG/CONT/SATU/HUE – Set the brightness/contrast/saturation/hue of each camera channel. The
default value of CONT (contrast) is 098, all other settings default to 128. For each setting, the value
is adjustable from 0 to 255.
• COV – Set to ON to mask the channel when recording. When this function is active, COV (covert) is
shown on the channel screen.
• REC – set to ON to enable recording for the selected channel. When this function is active, the icon
appears on the live channel screen.
4.5.2 DETECTION
Move to DETECTION, then press ENTER to open the DETECTION submenu. This submenu includes:
• TITLE – The name of the camera channel. This item can be set in the CAMERA submenu.
• DET – Set to ON, or OFF to disable motion detection.
• AREA – Press ENTER to select the detection area. You will see screens similar to the following.
Pink blocks represent the area not being monitored; clear blocks represent areas monitored for
motion detection. There are two different methods to set the detection area depending on the
model you have.