User manual
20
www.supercircuits.com
SECTION 4: DVR SOFTWARE USAGE
The DATE submenu items are described below:
• DATE – Set the current date and time. The default order is YEAR / MONTH / DAY HOUR : MIN :
SEC.
• FORMAT – Select one date format from the following 3 options: Y/M/D, M/D/Y, D/M/Y.
• DAYLIGHT SAVING – Use the p and/or q buttons to enable or disable automatic daylight saving
time correction (ON/OFF). When set to ON, press ENTER to open to a submenu to set the start and
end time.
The example above shows that daylight saving time is setup to begin on the 4th Sunday of March and
end on the 4th Sunday of October. During that period, system time will increase by one hour.
After setting the DAYLIGHT SAVINGS time parameters, press MENU to exit.